A heavy-duty hydraulic scale featuring a sleek in-cab display. Instant weights. No zeroing loops.
A heavy-duty hydraulic scale featuring a robust top-seat outdoor display unit. Maximum durability.
The WeighPro Classic connects directly to your crane or loader hydraulic system. Every time you lift, the hydraulic pressure is read instantly and converted to an accurate weight — no zeroing, no recurring calibration, no delays. The link is calibrated once by your dealer at installation using two known weights, and never needs recalibrating unless you change the grab or rotator.
The hydraulic link sits between the rotator and the crane. When the operator lifts, hydraulic pressure builds inside the link cylinder. One press of the button on the crane joystick and the system instantly reads this pressure and shows the weight on screen.
Once installed, WeighPro is ready every time you lift. The driver presses a single button on the crane joystick, the hydraulic link reads the pressure and the weight appears on screen instantly. No zeroing before each load, no recurring calibration - just lift, press and read.
When the weight is confirmed, one button press generates a weighbridge-style printed docket on the spot. No handwriting, no estimating.
Every WeighPro kit is bespoke to your machine. Select your machine type, crane brand and display option to see exactly what's in your kit.
What type of machine do you have?
Select Your Crane Brand
Choose your display option
See the difference at a glance.
Every advantage WeighPro has comes from one decision — hydraulic over torsion. Here's what that means for you on the job.
Rain, mud, rough handling — WeighPro doesn't flinch. Fully sealed and field proven in Ireland, the UK, Canada and beyond.
A double beep tells the driver the reading is locked — no need to take your eyes off the load. Cylinder pressure displayed on screen at all times.
No submenus, no complicated setup, no engineering degree needed. Clear display built for operators — not office workers. Straight to the point, every time.
Reset the total load counter directly from the cab lever button.
Your WeighPro link is bespoke to your crane — but if you move to a different machine, just recalibrate and you're away.
Connects directly to your existing crane or loader hydraulics. No major modifications.
Torsion-based load cells degrade over time. Operators re-zero before every load. WeighPro is hydraulic — nothing to wear out, and once your dealer has calibrated the link at install, no recurring recalibration is required.
Real operators. Real worksites. Real results.
Timber Haulier
"It's simple — the system works. We load right, we don't get fined."
Read Full Story
Timber Haulier
"Three cranes, all running WeighPro — we wouldn't use any other system."
Read Full Story
Dealer · WeighPro Classic System
"Dozens fitted. Never a call back. The system just works."
Read Full Story
Timber Haulier
"In Austria the timber must be weighed at roadside. WeighPro is the only system our operators trust."
Read Full Story
Timber Haulier · WeighPro Classic System
Timber haulier running the WeighPro Classic System across Wales.
Read Full Story
Timber Haulier · WeighPro Classic System
"Simple to use and effective."
Read Full Story
Timber Haulier · WeighPro Classic With Printer
"Within 150kg per load. The printer wins us customers."
Read Full Story
Dealer — Epsilon & Palfinger
Crane dealer fitting WeighPro Classic to every Epsilon and Palfinger build.
Read Full Story
Forestry Engineer & Dealer
"Consistent, accurate weights — saves fuel, prevents overloading and gives my customers the same confidence I have in the system."
Read Full Story
Timber Haulier · WeighPro Classic System
WeighPro Classic weighing every load before it leaves the forest.
Read Full Story
Timber Haulier · WeighPro Classic System
Hauling timber across New Brunswick with the WeighPro Classic System fitted.
Read Full StoryTalk to your nearest WeighPro dealer to find the right setup for your crane.
